HOW TO GET STOCK Frimware OF VIVO Y97(PD1813/F/FW)

DOWNLOAD VIVO Y97 Firmware CLICK HERE 

HOW TO FLASH VIVO Y97:

Flashing a Vivo Y97 using SP Flash Tool involves several steps, including downloading the necessary files and tools, preparing your computer, and performing the actual flashing process. Below is a step-by-step guide to help you through the process:

Warning:

Flashing your device can void your warranty and may brick your device if not done correctly. Proceed with caution and ensure you follow the steps carefully.

Requirements:

1. SP Flash Tool: Download the latest version from the official website.
2. Vivo Y97 Firmware: Download the official firmware for Vivo Y97.
3. VCOM Drivers: Install the MediaTek VCOM drivers on your computer.
4. USB Cable: Use a compatible USB cable.

Steps to Flash Vivo Y97 using SP Flash Tool:

Step 1: Install VCOM Drivers

1. Download the VCOM Drivers and extract them.
2. Open Device Manager on your computer.
3. Click on Action > Add Legacy Hardware.
4. Click Next > Choose Install the hardware that I manually select from a list (Advanced) > Next.
5. Select Show All Devices > Next > Have Disk.
6. Browse to the extracted VCOM driver folder and select the appropriate driver for your OS.
7. Follow the on-screen instructions to complete the installation.

Step 2: Download and Extract SP Flash Tool

1. Download the SP Flash Tool from the official website.
2. Extract the SP Flash Tool to a folder on your computer.

Step 3: Download and Extract Firmware

1. Download the official firmware for the Vivo Y97.
2. Extract the firmware to a folder on your computer.

Step 4: Open SP Flash Tool

1. Open the folder where you extracted SP Flash Tool.
2. Right-click on flash_tool.exe and select Run as administrator.

Step 5: Load the Scatter File

1. In SP Flash Tool, click on Choose in front of the Scatter-loading File option.
2. Navigate to the folder where you extracted the firmware and select the scatter file (usually named MTxxxx_Android_scatter.txt).

Step 6: Configure SP Flash Tool

1. Once the scatter file is loaded, SP Flash Tool will populate the firmware details.
2. Ensure all the required partitions are selected (e.g., preloader, recovery, system).
3. Choose the Download Only option if you want to retain your data. For a full clean flash, you can choose Firmware Upgrade.

Step 7: Connect Your Device

1. Power off your Vivo Y97.
2. Press and hold the Volume Down button on your device and connect it to your computer using the USB cable.
3. SP Flash Tool should detect your device. If it doesn’t, you may need to install the VCOM drivers again or try a different USB port/cable.

Step 8: Start Flashing

1. Click on the Download button in SP Flash Tool to start the flashing process.
2. Wait for the flashing process to complete. You should see a green checkmark indicating a successful flash.

Step 9: Disconnect and Reboot

1. Disconnect your Vivo Y97 from the computer.
2. Power on your device. The first boot might take longer than usual.

Troubleshooting:

• Driver Issues: Ensure that VCOM drivers are correctly installed.
• SP Flash Tool Errors: Refer to the error codes and messages within SP Flash Tool for specific troubleshooting steps.
• Firmware Compatibility: Ensure that the firmware is specifically for Vivo Y97.

By following these steps carefully, you should be able to successfully flash your Vivo Y97 using SP Flash Tool.